Troubleshooting Your Automatic Watch Winder
Whether you’re a beginner watch collector or a devoted horologist, owning an automatic watch can be a great hobby. But after a few days of being unworn, most automatic watches require their timepieces to be reset and rewound in order to maintain accurate time.
This task can be time consuming and frustrating. Luckily, there are watch winders designed to make the process much easier on you. These helpful and often luxuriously appointed machines store your precious self-winding timepieces while also keeping them charged via electronic, motorized rotations — the timing, direction, and duration of which can often be pre-set and monitored — that mimic the natural movement of a wearer’s wrist.
How Watch Winders Work
A watch winder is a device that will keep an automatic watch running while you aren’t wearing it. The watch winder will rotate your watch periodically to simulate wear, which will then keep the rotor of your automatic watch wound. It’s a great way to ensure that your automatic watch will always be ready to wear.
Automatic watches are a type of watch that is powered by a mainspring. This mainspring is a spring that keeps the rotor spinning inside the watch. When the rotor isn’t moving, the watch won’t be able to keep the mainspring wound, and it will eventually stop working. This is why you should keep an automatic watch wound if you’re going to remove it from your wrist for longer than 24 hours.
Most automatic watches are equipped with a special mainspring that is designed to not come to the end of its spring. While this is important, it can make it hard for the rotor to spin to the same extent as it would when the watch is worn.
This is why most people will put their automatic watch in a watch winder when they aren’t wearing it. This is so the rotor will be able to replicate the motions of the person who is wearing the watch.
The movement of the rotor will be able to mimic the movements that a person makes when they’re walking or exercising. This is a good thing because it will prevent the rotor from over-winding, which could cause the watch to break down.
Another benefit to keeping your automatic watch in a winder is that it will help lubricate the movement and prolong the periods automatic watch winder of time that it will need to be serviced. This is a great benefit for collectors and watch enthusiasts because it can save them a lot of money in the long run.
There are a variety of different types of automatic watch winders available in the market. Some of these are simple boxes that will only rotate in one direction, while others are more complicated and can be programmed to rotate in multiple directions. There are also a variety of styles and designs for each type of watch winder, including elegant and extravagant options. Some even have heaters to keep the rotor warm and feature built-in storage drawers, atomic-clock-synchronized time displays, and more.
Choosing a Watch Winder
There are a few important things to consider when buying an automatic watch winder. First, it should be able to accommodate your collection of watches and provide a secure place to store them. This will help prevent any accidental damage from occurring while you aren’t wearing them.
Second, a watch winder should be able to rotate your timepiece a few times each day. This will keep the lubricants inside of your automatic watch from clogging up.
Third, a watch winder should be made of high-quality materials to ensure that it will last you for years. It should be crafted out of fine wood, leather or even covered with silk. This will ensure that it will complement your watch and add to its elegance.
Fourth, a watch winder should be a programmable device that will be able to set the number of turns that it makes. This will be an important feature for any automatic watch, as many of them need to be wound a certain number of turns each day in order to function properly.
Finally, a watch winder should be quiet enough to not disturb your sleep or other activities during the night. This is especially important if you plan on using it in a bedroom or other closed-off space, such as a safe.
A good watch winder will also be able to keep your watch at the correct setting, so that it remains accurate. This is important because if you let your watch sit unwound for long periods of time, it can start to lose its accuracy.
You should also make sure that the watch winder you choose has a holder design for your watches. These can either be a cushion pillow or a spring-loaded mechanism that holds your watches securely without stretching them out.
The holder design should be finely crafted to securely hold your watch without automatic watch winder unnecessary stretching or deformation. This will ensure that your watch stays in top condition while it is winding and will keep it looking new and pristine for years to come!
Choosing a watch winder is an easy way to improve the life of your valuable timepieces. There are many different options out there, and you can take your time to find the one that will suit your needs best.
Using a Watch Winder
Watch winders work by fastening the strap of a watch to a rotating head that mimics the motion of a wrist. This helps to keep the watch’s internal mechanisms lubricated and prevents them from becoming coagulated over time, which is the primary reason why automatic watches need to be worn constantly.
Many people who own watches worry about the oils in their watch drying out and causing coagulation or rusting over time, but this is not a concern with proper use of a quality automatic watch winder. These winders help to keep the watches in top condition and functioning optimally, and are a great investment for any watch enthusiast!
When you get a watch winder, it’s important to set up the settings correctly. This can be a bit of a trial and error process, but once you’ve gotten the settings right it will be easy to maintain your timepiece.
The first step is to figure out how often you need to rotate your watch. This will depend on your lifestyle and how much you wear your watch, but generally speaking, you should try to set it up to rotate every day.
Next, you’ll want to find the right direction to wind your watch in. Most watches are fine with a bi-directional winder, but some models may require a specific setting.
You can also choose from various sizes of watch winders depending on your needs. For example, if you’re just starting out with a small collection and don’t have many watches yet, a smaller winder might be more convenient for you.
If you have a larger collection of watches, an automatic watch winder can be a great way to keep your watches running in a consistent manner so that they always look and work their best. This is especially helpful for those with more complicated watches, like perpetual calendars or moonphases, which can take a while to reset after the watch has been left in storage.
A good quality winder will also feature a variety of programs to accommodate your needs. Some winders even have touchscreens to make it easier to select the proper program for your timepiece!
Troubleshooting a Watch Winder
If your automatic watch winder stops working, there are a few things you can do to troubleshoot it. First, you’ll want to determine if the problem is with the motors or something else. To do that, you’ll need to test the power supply by unplugging the batteries and plugging in the mains. This should give you an idea of what the problem is, and if it’s the motors that need replacing, you can then purchase replacement parts to fit yourself.
If the motors are making a louder noise than normal, this could indicate that they’re nearing their end of life. They may also be causing a grinding sound or a laboured whirring noise when you wind the watches. This can be very distressing to hear, and should not be ignored.
Another sign of a motor getting old is that it starts to run more slowly. This can be very subtle and you might not notice it, but it’s a good indicator that the motor is starting to go bad.
Finally, if the winder doesn’t keep up with your watch, this can also be a sign of a problem. This is because the watch needs to be turned several times a day, and your watch winder will need to make sure it turns the correct amount every time you use it.
The amount of time the winder needs to turn your watch will be specified by the manufacturer, but it’s usually somewhere between 650 and 950 turns per day (TPD). If you’re using a more powerful or larger watch, it might take longer for it to turn, so make sure you’re selecting a watch winder that can handle your weight.
There are a lot of different models on the market, and each has its own features. Some are simple, while others go all out in style and functionality. The most expensive can even feature heaters to keep the watch warm, built-in storage drawers and atomic clock synchronized time displays.